Dimensions
|
|
Brewer:
|
1332mm wide x 480mm deep x 470mm high Note: The depth of the brewer is 515mm with the mains supply connected. A gap of 60mm is needed behind the plumbed brewer for the mains water supply pipework.
|
| Filterpack Unit: |
346mm wide x 410mm deep x 470mm high, 12 selections and 276 drinks
|
Additional Module: |
85mm wide x 410mm deep x 470mm high, 3 selections and 69 drinks
|
Ancillaries Unit: |
105mm wide x 410mm deep x 470mm high
|
Cup Holder: |
110mm wide x 410mm deep x 45mm high, capacity of 150 cups
|
Complete System: |
900mm wide x 480mm deep x 470mm high
Brewer, 12 selection filterpack unit, ancillaries unit, cup holder.
|
| Base Cabinet: |
730mm wide x 620mm deep x 900mm high
9 selection filterpack unit for use with base cabinets has 207 drinks capacity.
|
| Water Supply |
|
| Plumbed: |
Mains drinking water supply requirements:
• Dynamic water pressure of 1 to 7 bar (15 to 100 psi)
• Flow rate of at least 2 litres per minute
• Water to be cold and sodium free
• BS1010 15mm stopcock within 1 metre of brewer
|
| Unplumbed: |
Cold water is poured into the brewer by hand.
Tank capacity is 7.6 litres.
|
| Power Supply: |
230V, 50 Hz, maximum 5 amps
Mains lead 2 metres long
|
| Power Consumption: |
1100 W Boiling mode, 75W Standby mode
|
| Payment System: |
(Pay brewer only)
• Accepts: 1p, 2p, 5p, 10p, 20p, 50p, £1, £2 coins
|
